Read all instructions before beginning your project. Read manufacturer labels on products and supplies being used. Have FUN!
Project By: Circuit Bridge Time to Do: 1 hour Skill Level: Beginner
Instructions
Step 1: Open the Clamp Light
Step 2: Take the Compact Fluorescent Light Bulb Out of its Packaging
Step 4: Screw the Compact Fluorescent Light Bulb into the Clamp Light
Step 5: Expose the Stencil Using the Compact Fluorescent Light
Put the Exposure Frame with the artwork and film on the hard and even surface. Situate the Clamp Light on top of the 2" x 2" blocks of wood. Turn on the the light. Follow the timing on the exposure chart below.
Paper Used: Office Depot Copy Paper standard white 20lbs. 104 bright Please Note that since our paper testing yielded great variations in exposure times; we can no longer recommend using
printer or copy paper. Please, use it at your discretion and only after careful testing and timing.
Congratulations!
You have successfully completed the Make Your Own Compact Fluorescent Exposure Light Project!
The information in this project guide is presented in good faith, but no warranty is given, nor results guaranteed. Circuit Bridge, LLC disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. Since we have no control over physical surrounding the application of information herein contained, Circuit Bridge, LLC disclaims any liability for untoward results.
PRINT GOCCO USERS Already
running out of supplies? Expensive light bulbs, limited number of
inks? Try our screens with GOCCO machines. Learn
More..
