Welcome Guest. Please sign in.                                                                                                                                     
Home of the PhotoEZ and StencilPro Screen Printing PhotoEZ and StencilPro Storefront About Us My Account Basket Contents Checkout
Products
Accessories
Product HowTos
Service & Support
StencilPro and PhotoEZ storewide sale
Today In Our Store
Screen Print Starter Kits
StencilPro Products
StencilPro Standard
StencilPro HighRes
PhotoEZ Products
PhotoEZ Standard
PhotoEZ HiRes
ReadyMade Stencils
Vellum & Transparency
Exposure Frames
Exposure Lights
Plastic Frames
Paints & Inks
Glass Etching
Jacquard Screen Ink
Versatex Screen Ink
Liquitex Paints
Jones Tones Puff Paints
Squeegees
Accessories
Yudu Compatible
Getting Started with PhotoEZ & StencilPro
Make Your Own Stencil
Use Your Stencil
DIY Exposure Light
Embellished Tote Bag
Screen Print T-Shirt
Embossed Card
Etched Mirror
Print GOCCO B6
Printed Circuit Board
Wall Art and Decor
Videos and How To
Silk Screening Videos
Creative Ideas
Customer Showcase
Creativity Corner
Tips & Techniques
What is PhotoEZ?
What is StencilPro?
Differences between StencilPro and PhotoEZ
Compare Products
Product Q&A
Service & Support
Troubleshooting
Get Help
Wholesale Inquiries
Shipping and Returns
We Ship International


Home > Howtos > Stenciled Canvas Wall Decor


Home Improvement - Stenciled Canvas and Frames Wall Decor with StencilPro
Project Guide by Circuit Bridge

Black Arrow  Back to Project Guide Index                                     Send to Friend
Stenciled Canvas and Frames Wall Decor Project Guide

Materials and Supplies
• One (1)    - sheet of InkJet or LaserJet Transparency Film
• One (1)    - 8.5" x 11" sheet of StencilPro Standard resolution
• One (1)    - can of 3M Spray Mount Artist's Adhesive
• One (1)    - 2" Pure Bristle brush
• Three (3)  - tubes of Lixuitex Basics Cadmium Red acrylic paint. Available at your local art store.
• One (1)    - 4 oz jar of Versatex Screen Printing ink, Silver Lace
• One (1)    - bottle of white Gesso (if canvas is not primed). Available at your local art store.
• Six (6)      - Flush Mounting Canvas sets. Available at your local art store.
• Three (3)  - 24" x 36" Canvases. Available at your local art store.
• Three (3)  - 10" x 12" Picture Frames with Mat
• Three (3)  - Picture Spot Lights. Available at your local art store or IKEA.
• One (1)     - Elecrical Extension Cord or Power Strip
• One (1)     - Measuring Tape
• One (1)     - Hammer
• One (1)     - Power Drill
• Three (3)  - 10" x 12" Pictures
• One (1)     - Redwood or Pinewood Standard Fence Board (1" thick)
• Wood Primer
• Cable Tacks
• Molly Bolts and Screws  - For canvas and picture frame installation.
• Artwork   - To be printed as backgound on the canvas.
                      Must be black and white only. Computer printout will do.
• Exposure Frame -key to keeping your artwork tightly pressed agaist the drawing.

Optional Equipment:
• One (1)     - 10.5" x 13.5" Plastic Canvas - to support the StencilPro stencil during rinsing and cleaning.
• One (1)     - Dark room specialty box for safely storing and developing (washing out) your stencils.

Project By:  Circuit Bridge     Time to Do: up to three days    Skill Level: Intermediate/Advanced

Description: this project guide will show you how to decorate a wall using canvas, screen printed with StencilPro silk screen stencils and embellished with picture frames. Any black and white art work can be used with StencilPro stencils. Pictures are mounted using flush mount that allows for easy picture rotation.

Read all instructions before beginning your project. Read manufacturer labels on products and
supplies being used. And most of all, Have FUN!

 
Instructions

Step 1: Print artwork on InkJet or LaserJet transparency

Circuit Bridge InkJet and LaserJet transparency is water proof. It is specially designed for screen printing application and coated for maximum density, image quality, and longevity.

Note: it is very important to only use true black and white artwork to produce quality stencils. If using mutiple colors, convert each color representation to black and white.

Step 2: Create a stencil by exposing StencilPro and artwork, sandwiched together, to light using Contact Frame

Keeping stencil tightly pressed againsts the drawing during the entire exposure is key to creating crisp high quality stencils. Follow instructions enclosed with your Starter Kit or Exposure frame.

Step 3: Prime canvas for painting

Using a wide brush, apply gesso directly to canvas in even strokes from top to bottom.

Loosely "Dry Fit" All Sides, Including 22" Top, then Glue to its Final Position. Attach Sides with End Caps

Step 4: Using Liquitex Basics Cadmium Red acrylic paint and wide strokes, paint on the background color

Move back and forth, left to right and back again as you paint on a big canvas; don't sit in one spot and stretch to outer edges of the canvas. If you do, the lines will tend to curve down at the ends with the way you move your arm.


Step 5: Print design on canvas using Versatex Silver Lace screen printing ink and your developed StencilPro stencil

To hold StencilPro stencil in place, lightly spray a 3M Spray Mount Artist's Adhesivefrom a distance of at least 12". Spray mount bonds lightweight StencilPro instantly, yet allows the stencil to be lifted and repositioned when needed.

Use circular brush movements to allow better ink penetration - Silver Lace ink contains metallic particles (it makes the color nice and shiny on our canvas); which could sometimes be a bit of a challenge to pass through the smallest detail openings in your StencilPro screen.


Step 6: Continue stenciling top to bottom making sure the printed designs align one on top of the other for a nice continuous backgound

Make sure the canvas is secured in place when applying the ink. Since canvas surface is nice and stretchy, pushing too hard on the brush will cause the surface to flex; thus, smudging the print.


Step 7: Screen print all three canvases with your design and allow for at least 48 hours of drying time before proceeding with the rest of the steps

Step 8: Use Flush Mounting for Canvas Art to mount canvases on the wall, as well as picture frames on the canvases

Flush mounting is great for keeping canvas and picture frames tight against the surface. It also allows for easy picture replacement in our frames. The one we used incorporates removable bubble level; which makes it easy to align canvas on the wall.


Step 9: Measure and mark the center of the back frame on the canvas and flush mount for proper alignment

Step 10: Attach flush mount bracket to the back of the canvas

Step 11: Install flush mount for canvas and anchors for Molly bolts to hold the wood board on which picture frames will hang.

6a. Mark the position and attach the other part of interlocking Flush Mount bracket to the wall.

6b. Mark the positions for the molly bolt anchors on the wall. Measure so that the canvas mount aligns with the center between the marks. This is where the picture frame will later attach to the wall through canvas and board.

6c. Using a power drill, drill a pilot hole in the marked spot big enough for the screw. If stud found, use the screw. If no stud found, drill a larger whole to put in Molly bolt.


Step 12: Using power drill and Molly bolts or screws, attach 1" x 8" primed wood board

We have used standard 1" thick redwood fence board; which we cut into 8" pieces and primed with wood primer prior to use.


Step 13: Measure and mount picture light on the wall directly above where the canvas will hang

Follow picture light manufacturer's instructions to mount it on the wall.

Use cable tacks to guide and attach picture light's cable on the wall.

If desired, paint bottom of the electrical cord with paint matching the wall color.


Step 14: Hang canvas by interlocking brackets of the flush mount on the wall and on the back frame of the canvas

Step 15: Measure and attach flush mount bracket to the wood board through the canvas

Step 16: Attach matching flush bracket to the back of the picture frame, making sure it is centered

Step 17: Insert artwork or picture into the picture frame. Hang picture frame on canvas by interlocking brackets of the flush mount on the back of the frame and wood/canvas.

Proceed with the rest of the canvases and picture frames. For convenience, plug all three picture lights into power strip.

Note: it is critical that you measure and check alignment at every step to make sure that lights, canvases, and picture frames are level.


 

Congratulations!
You have successfully completed the Stenciled Canvas and Frames Wall Decor with StencilPro Project!

 
The information in this project guide is presented in good faith, but no warranty is given, nor results guaranteed. Circuit Bridge, LLC disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. Since we have no control over physical surrounding the application of information herein contained, Circuit Bridge, LLC disclaims any liability for untoward results.
 

Print GOCCO Users
Already running out of supplies? Expensive light bulbs, limited number of inks? Try our screens with GOCCO machines. Learn More..

Inspiration:
Visit our Creative Ideas Section

SecurityMetrics Certified We accept all major credit cards and PayPal
StencilPro™ - Patent Pending
Copyright © 2006-2014 Circuit Bridge LLC. All rights reserved.